Trimmed F-713 R&L for fit & match drilled. Plans call for trimming aft end to butt up to F-704, but I trimmed fwd end as well to make it mesh better with the firewall angles.
Also trimmed and match drilled F-719 stiffeners. These had the same crappy joggles on the aft end that the firewall angle had. I gave them some encouragement with a hardwood block and BFH at the location indicated by the blue arrow in the picture below and got them a little smoother, but these are likely going to need a little shim behind them at the transition the skin at the joggle so it will lay flat.
Also fabricated the F-719B angle clips and will match drill them to the assy next time